Pullers & Extraction Tools

65mm capactity Versatile, high quality carbon steel bearing pullers from SKF, available in two of three jaw design. - simple and effective way to dismount small to medium bearings and components.

Cone system for automatic centring and secure positioning of arms

Strong springs keep arms apart for easy operation

Hardened, high quality carbon steel
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Puller Protection Blanket TMM x 350 provides additional user safety during dismounting.

Main Features and Benefits:

Designed to offer additional user safety, while dismounting bearings or other components

After the puller has been positioned, the blanket is simply wrapped around the puller and application

The tough, transparent plastic allows the user to monitor the component and the puller during operation

Especially designed to fit SKF TMMA series pullers, they are also suitable for use in combination with many other pullers

PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

170mm capactity Versatile, high quality carbon steel bearing pullers from SKF, available in two of three jaw design. - simple and effective way to dismount small to medium bearings and components.

Cone system for automatic centring and secure positioning of arms

Strong springs keep arms apart for easy operation

Hardened, high quality carbon steel
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

185mm capactity Versatile, high quality carbon steel bearing pullers from SKF, available in two of three jaw design. - simple and effective way to dismount small to medium bearings and components.

Cone system for automatic centring and secure positioning of arms

Strong springs keep arms apart for easy operation

Hardened, high quality carbon steel
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Sturdy design allows dismounting of components even in the tightest

application in - safe manner

• The unique red rings spring-operated opening mechanism allows the

SKF EasyPull to be placed behind the component with one movement

of the hands

• Self-locking arms help prevent the risk of puller slipping under load

• Double Hexagonal heads allow easier application of withdrawal force

• Self-centring capability and nosepiece help avoid damage to shaft

• Efficient use of time due to quick dismounting

PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

TMIP 7-28 internal e x tractor set

Tool kit for removing roller bearings from the housing; fits to the outer ring

Based on spring-loaded pullers with - special slide hammer

E x tremely hard, chrome-plated steel; optimum service life

Pulling device creates - positive fit with the inner ring
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Equipped with spring-operated arms and - solid design, SKF’s patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Suitable for use on blind housings and shaft applications

Removes bearings from shaft diameters 10-100mm

Arms range from 135mm to 170mm in length

Arm sizes 4, - and - are fitted with filling plates to accommodate - wide range of bearings

Puller arms are made from - single-piece laser-cut hardened steel for strength and longevity

Claws are designed to facilitate - precise fit in the raceway allowing the application of higher dismounting forces

Bearing Selection Chart included
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

The TMHC 110E is - combination kit consisting both of - jaw puller and - strong back puller. The jaw puller can grip components with an outside diameter of up to 160 mm (6.3 in). The strong back puller, which grips behind components where jaws cannot enter, can handle components with - Maximum shaft diameter of 100 mm (4 in). Maximum pulling force for both pullers are equivalent to 100 kN (11.2 US ton force)
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS0 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS1 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS2 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS3 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS4 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS5 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

These TMFS6 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK